Featured
- Get link
- X
- Other Apps
How To Check Compressor On Refrigerator
How To Check Compressor On Refrigerator. Shake the relay in your hand and listen for a rattle. Leave the fridge unplugged for 5 minutes.

Remove the refrigerator away from the wall to access the rear side and open the side panel of the compressor. You can easily locate the side panel. Run a continuity test on the relay between its terminals using a multimeter to troubleshoot the component further.
Normally, The Resistance Will Be 30 Om.
If something knocks inside it that means the relay is bad and this is excluded from refrigerator compressor failure symptoms. There will be a small fan and a metal wire cage towards the top of the unit. The condenser coils are behind it.
Then You Check The Refrigerator, The Compressor Is Working Badly Or Any Other Problem In It.
Most refrigerators have two low sides. Now, you can pull the relay out from the compressor. Then, unscrew the bottom rear access panel;
In This Video I Will Share With You My Method Of Checking A Refrigerator Compressor To See If It Is Good Or Bad.
Turn both the fridge and freezer controls to ‘off’ or ‘0’ in the fridge. How to tell symptoms if compressor. How to test single phase fridge compressors electrically.
But If It Doesn’t Rattle, The Relay Is Good And This Time This Is One Of The Symptoms Of Your Bad Refrigerator Compressor.
During the day, at different points, the sound or the noise you listen to indicates the compressor. If you don’t know the location of the compressor fan, confirm from the owner’s manual. Pull the wire retainer that holds the relay to the compressor off.
Disconnect The Refrigerator From Power And Put One Ear To The Refrigerator’s Side.
If the relay shakes or rattles, the relay is bad. Shake the relay in your hand and listen for a rattle. Test the thermostatic control knob test the fan.
Comments
Post a Comment